Belmont Belsensor Gold SED

Published 2022-10-10

Subject to changes and corrections.

BELMONT BELSENSOR GOLD / DENTALAIRE DTX / DENTALMIND DIGITAL X-RAY II / DENTIMAX4 SENSOR / EVA SELECT / POLODENT / QUICKRAY DIRECTUSB / SOTA CLIO / TUXEDO A-SERIES / XDR

Note: The general e2v II sensor extension for XV/XVLite has been discontinued as of 01/11/2013. In its place, Apteryx has released extensions appropriately named for each Original Equipment Manufacturer (OEM) that distributes the sensor using their own private label.

Version 10.2 (Build 1) (Released TBD)

Beta Release 2018-07-09

Recommended Minimum Driver Version: 3.7.0

• Corrected issue with applying calibration/correction file to images. (F3789)
• Corrected issue with diagnostic image option. (F3709, F3762)
• Corrected issue with specifying custom calibration file path. (B1449)
• Corrected issue with retrievING last error code from drivers. (F3780)

Version 10.2 (Build 1) (Released 2018-01-03)

Beta Release 2017-10-31

Recommended Minimum Driver Version: 3.7.0

• Initial release of “Tuxedo A-Series” Sensor extension. (F3656)
• Added low dose detection utility to announce when images are under exposed. (F3603)

Version 10.1 (Build 2) (Released 2016-05-10)

Beta Release 2016-05-10

Recommended Minimum Driver Version: 3.7.0

• Added language translation capability for error messages. (F2684)
• Modified order of GBC (gamma brightness contrast) filters to be applied after all other filters. (F3140)

Version 10.1 (Build 1) (Released 2015-08-27)

Beta Release 2015-08-27

Recommended Minimum Driver Version: 3.7.0

• Added support for new driver version 3.7.0. (F2781)
• Added new Adaptive Normalize and Enhance Local Contrast (CLAHE) image filter options. (B1192)
• Added automatic rotation functionality for newer size 2 sensors. (F2820)
• Changes to default hardware settings for specific OEM versions. (F2705)
• Built new OEM version. (F2568)

Version 10.0 (Build 27) (Released TBD)

Beta Release 2015-01-15

Recommended Minimum Driver Version: 3.6.1

• Changed hardware timeout defaults for various OEM versions. (F2108)

Version 10.0 (Build 25) (Released TBD)

Beta Release 2013-07-17

Recommended Minimum Driver Version: 3.6.1

• Added support for SDK version 3.6.1 with new “Xray Detection Filter” setting to resolve auto triggering issues. (F2073)
• Resolved issue with XVLite error “unable to get image file size” after capture. (B1046)
• Resolved issue with overwhitening the lighter areas of image. (F2073)
• Rebuilt with latest Apteryx Image Filter algorithm support (AImg). (F2405)
• Modifications to OEM version default settings. (F2098, F2425)

Version 10.0 (Build 24) (Released TBD)

Beta Release 2013-12-12

• Added support for 16-bit capture and return. (F1981)
• Added option to “close hardware after layout capture is complete.” (B943)
• Resolved issue with sensor remaining at Sensor Ready after x-ray exposure. (B943)
• Added option to specify hardware timeout. (B943)
• Resolved issue with option to “make corners black”. (B984)
• Added debug logging option for troubleshooting communication with drivers. (B943)
• Added watermark for specific dealer version of plugin. (F1991)

Version 10.0 (Build 23) (Released TBD)

Beta Release 2013-07-08

• Created Clio version of SED. (F1915)

Version 10.0 (Build 22) (Released TBD)

Beta Release 2013-03-19

• Implemented more streamlined calibration file handling. (F1762)
• Modified default settings for QuickRay SED. (F1763)

Version 10.0 (Build 21) (Released TBD)

Beta Release 2013-01-11

• Created XDR version of SED. (F1701)
• Created Dentalaire DTX version of SED. (F1603)
• Additional requested filters added to Dentimax4 SED. (F1531)

Version 10.0 (Build 20) (Released TBD)

Beta Release 2012-05-25

• Updated for SDK 3.2.1. Requires the following DLLs: (F1436)
  • IO_XRayUSB_MD_VC80.dll (3.2.1.0)
  • TLC_USB.dll (1.3.6.0)
• Added OEM version for Belmont BelSensor Gold, with custom default filtering. (F1455)

Version 10.0 (Build 18) (Released 2012-01-26)

• Added support for SDK 3.2.0. (F1306)

Version 10.0 (Build 17) (Released 2011-02-21)

• Added support for SDK 3.1.0. (F911)

Version 10.0 (Build 15) (Released 2011-01-26)

• Added support for SDK 3.0.7. (F911)

Version 10.0 (Build 14) 1/12/2011

• Resolved over-contrasting for Size 1 images set to High Contrast with Sharpening enabled. (B511)

Version 10.0 (Build 12) 12/22/2010

• Added Adjust Levels option tab. (F876)
• Modified SED to report calibration file error in status window, rather than popup an error message. (F877)

Version 10.0 (Build 11) 11/30/2010

• Added SDK image resolution information when returning images. (F856)
• Modified all OEM versions to use AImg DLL filter algorithms. (F855)

Version 10.0 (Build 10) 11/12/2010

• Resolved SED backwards compatibility issue with pre-3.12 XV by renaming layout tile capture reorient function. (F846)

Version 10.0 (Build 9) 10/25/2010

• Modified default filter settings for Dentalmind Digital X-Ray II version with latest AImg filter set. (F646)

Version 10.0 (Build 8) 10/19/2010

• Added Anturi version of e2vII SED. (F824)

Version 10.0 (Build 7) 10/11/2010

• Implement language translation abilities for Switch Sensor popup window.

Version 10.0 (Build 6) 9/23/2010

• Fixed issue with low contrast image being returned after applying AImg Sharpen filter, despite High Contrast being enabled. (F451)

Version 10.0 (Build 5) 9/1/2010

• Added AImg.dll filter options for Sharpen, Noise Removal, and Smooth.

Version 10.0 (Build 4) (Released 2010-08-20)

• Added Quickray DirectUSB version of e2vII SED. (F647)

Version 10.0 (Build 3) (Released 2010-05-21)

• Added Dentimax4 version of e2vII SED. (F704)

Version 10.0 (Build 2) (Released 2010-05-21)

• Fixed a problem in which brightness and gamma adjustment were backwards. (B385)

Version 10.0 (Build 1) (Released 2010-05-05)

• Modified and compiled in Visual Studio 2010.

Version 1.0 (Build 20) (Released 2010-04-21)

• Rebuilt SEDs with v3.0.4 SDK files.

Version 1.0 (Build 19) (Released 2010-04-01)

• Changed how Quick Sensor works. If the saved sensor is no longer present, it will see if there are other sensors connected. If one is found, it will capture with it. If two are found, it will capture with size 2 sensor if available, otherwise, use the first size 1 sensor in the list.

Version 1.0 (Build 18) (Released 2010-03-04)

• Modified noise removal, sharpen and smooth filters to use newer, faster AImg algorithms. AImg.dll is required.

Version 1.0 (Build 17) (Released 2010-03-11)

• Added new capability to track when the user cancels the acquisition process.

Version 1.0 (Build 16) (Released 2010-02-11)

• Added ability to use .CAL files.

Version 1.0 (Build 5) (Released 2008-05-22)

• Initial release.